Wayne Dalton Fire Rated Doors Firestar Models 700 &700C
FireStar® fire-rated doors provide a practical and innovative solution to safety and fire protection for high traffic areas. Rolling Steel Fire Doors can be drop-tested and reset at any time by anyone, thanks to a standard auto-reset feature. Model 700C is an insulated rolling steel fire door with a non-combustible mineral wool insulation that has a flame spread and smoke development of 0, further aiding in the protection of the building. Both fire-rated doors feature a forward-thinking design that outperforms industry standard fire doors in all areas, including auto-reset testing capability; smooth, quiet operation; and reliable, long-lasting performance.
Ideal Applications Include:
Distribution Centers | Food Service Areas | Stadium Concessions | Service Stations | Storage Areas | Warehouses | Manufacturing | Trucking Distribution Center
Quantity
Features
| Standard Construction | Model 700C | Model 700 |
| Max. Width** | 22'" | 24' |
| Max. Height** | 22' | 24' |
| Max. Sq. Footage | 324 sq. ft. | 324 sq. ft. |
| Material | Galvanized or Stainless Steel | Galvanized or Stainless Steel |
| Curtain Material | 3" insulated galvanized steel flat slats (#34 profile) 22-gauge steel front / 24-gauge steel backer | Interlocking roll-formed slats with alternate slats fitted with metal end-locks/ wind-locks |
| Max Steel Gauge | 22 | 18 |
| Operation | Chain hoist or Motor | Lift-up |
| Mounting | Face mount angle-in or angle-out; between jambs | Structural steel, drywall over wood stud jamb, drywall over 16-gauge steel stud jamb |
| Counter Balance | Helical springs, oil tempered, iron barrel plugs for anchoring springs to shaft and pipe; 20,000 cycle | Helical springs, oil tempered, iron barrel plugs for anchoring springs to shaft and pipe; 20,000 cycle |
| Hood | 24-gauge galvanized steel /stainless steel round hood | 24-gauge galvanized steel /stainless steel round hood |
| Bottom Bar | Galvanized steel double angle with weatherstrip and insulation | Two equal angles Thickness- 0.121" min to stiffen curtain |
| Brackets | 3/16" or 1/4" steel plates with sealed ball bearings, painted factory black | 3/16" or 1/4" steel plates with sealed ball bearings, painted factory black |
| Release Mechanism | No | Yes |
| Slat Profiles | No. 34 | No. 2, No. 4, No. 14, No. 17 |
| R-value* (optional) | 5.0 | No |
| Wind Load (optional) | Yes*** | Yes*** |
*Wayne Dalton uses a calculated door section R-value for our insulated doors
**Maximum height and maximum width are independent of each other and may vary based on slat profile, material and gauge
*** FBC and Miami Dade approved wind load reinforcement is available for hurricane-prone areas
Benefits
High-Quality Construction
- Patent-pending planetary gear on the drop-out mechanism ensuring years of reliable service and drop-out performance
- Lift up operation control device utilizing a clutch plate and unique counterbalance technology to drop the door in the event of a fire
- UL/ULC/FM rated; Conforms to NFPA Standard 80
- Up to 4-hour and 3-hour Class A label in UL, ULC
- Regulates the installation and maintenance of assemblies and devices used to protect openings in walls, floors, and ceilings against the spread of fire and smoke
- Tested and approved to meet the requirements of well-known agencies, such as Underwriters Laboratories and Factory Mutual
Reliable Design
- Factory-tested and approved for a minimum of 20,000 cycles, the FireStar® door can be used and easily tested on a regular basis without concerns of premature failure
- Non-Tension Release provides the ease of simply opening the door to reset the drop mechanism after ‘an event’
Field Repairable
- Floor resettable features an easy drop test with a fast/simple reset in a matter of seconds
- By incorporating one standardized component design, this ensures more accurate installations and reduces the possibility of potential service calls in the future
Warranty
- 24-Months Limited Warranty on all product parts and components
Enhancements
Operation
- Manual Crank
- Motor operation
- Chain hoist
Safety Focused
Signal Device Options
- Fire Release Device
- Horns and Strobes
- Smoke Detectors
Sensing Edge Options
- Electrical
- Pneumatic
Viscous Governor
Design Solutions
Wind Lock Options
- Alternating or continuous with windbar
Florida Building Commission Impact Rating – Certified for Florida's High Velocity Hurricane Zone (Up to +/- 55 psf)
Design Options
Design Options
Slat Profiles: 700
| Profile | Slat | Gauge | Pitch |
| No. 2 | Curved-faced single crown slat | Up to 20-gauge steel Up to 20 or 22-gauge stainless steel |
1.9’ |
| No. 4 | Curved-faced single crown slat | Up to 18-gauge steel Up to 20 gauge stainless steel |
2.8’ |
| No. 14 | Flat-faced slat | Up to 18-gauge steel Up to 18-gauge stainless steel |
2.45’ |
| No. 17 | Flat-faced slat | Up to 20-gauge steel Up to 20 gauge stainless steel |
1.6’ |
Slat Profiles: 700C
| Profile | Slat | Gauge | Pitch |
| No. 34 | Flat-faced slat | Up to 18-gauge steel or stainless steel | 2.45' |
Vision Options
- FireLite*- 5" x 3/4"
- FireLite* fenestration with glass vision lite
- 6" curved slat
Curtain Gauge Options
- 20 or 18-gauge Steel front
- 22, 20, or 18-gauge Stainless steel front
Bottom Bar Options
- Stainless steel double angle
- Galvanized structural steel angle construction
- Sloped
Bottom Edge Options
- Astragal
- Pneumatic
- Electric sensing
Hood
- 22-gauge steel
- Square hood
Locking Options
- Slide bolts
- Cylinder
- Best lock
- Thumb turns
Perimeter Seal Options
- Angled guide brush seal
- Exterior lintel weather
- Flame baffle
- Smoke package
- Full perimeter seal
- Caulking
- Label
End Covers
FM label
Fascia
*FireLite is a trademark of Nippon Electric Glass Company