Wayne Dalton High Cycle Rolling Service Doors Model 800 HC & 800C HC
Models 800 HC and 800C HC offer the safety and security of a rolling service door, with the added benefit of a cycle life 25 times more than our standard service door and the ease of maintenance that comes with an innovative springless design. With a 500,000 cycle life, Models 800 HC and 800C HC are ideally suited for applications requiring a strong and durable rolling service door. These doors offer a variety of insulation, airflow, and weather seal options. High cycle rolling doors are ideal for high traffic areas requiring long-lasting durability.
Ideal Applications Include:
Warehouse and Industrial facilities | Manufacturing Facilities | Parking Garages | Public and Government Facilities | Shipping and Receiving Docks | Food and Beverage Facilities
Quantity
Features
| Standard Construction | Model 800 HC | Model 800C HC |
| Max. Width** | 20' | 20' |
| Max. Height** | 20' | 20' |
| Mounting | Interior/exterior face-of-wall | Interior/exterior face-of-wall |
| Curtain Material | 3" flat slats (#14 profile) 22-gauge galvanized steel |
3" insulated flat slats (#34 profile) 22-gauge galvanized steel front/24- gauge galvanized steel backer |
| Operation | Direct drive integrated motor/gearbox/brake assembly with a hand chain for power outages | Direct drive integrated motor/gearbox/brake assembly with a hand chain for power outages |
| Control Panel | Electronic controller with microprocessor self-diagnostics Digital readout, time delay self-close timer and non-resettable cycle counter. Enclosure is IP54 rated (NEMA 3 equivalent) | Electronic controller with microprocessor self-diagnostics. Digital readout, time delay self-close timer and non-resettable cycle counter. Enclosure is IP54 rated (NEMA 3 equivalent) |
| Supply Voltage | 230 VAC 3PH | 230 VAC 3PH |
| Door Roll | Yes - No counterbalance required | Yes - No counterbalance required |
| Bottom Bar | Two primed angles with weatherstrip | Two primed angles with weatherstrip |
| Guides | 3 angle guide assembly | 3 angle guide assembly |
| Hood | 24-gauge steel | 24-gauge steel |
| Steel Gauge | 18 | 18 |
| Exterior | Steel | Steel |
| R-value* | 7.71 | 7.710 |
| STC Rating | 22 | 22 |
| Safety Features | Built-in brake mechanism Photoelectric sensors with commercial grade guards Motor cover |
Built-in brake mechanism Photoelectric sensors with commercial grade guards Motor cover |
| Actuator | Push-button | Push-button |
| Wind Load (optional)*** | Yes | Yes |
*Wayne Dalton uses a calculated door section R-value for insulated doors.
**Maximum height and maximum width are independent of each other and may vary based on slat profile, material and gauge
***Only internally approved wind load reinforcement is available to withstand conditions in wind prone areas
Benefits
High-Quality Design
- Reliable direct drive springless design provides smooth high-cycle operation creating longevity and reliability over an extended time eliminating spring replacement cost and inconvenience
- The variable frequency drive system operates on a soft start/stop to help prevent wear and tear on the system
- Wind load up to +/- 55 psf
Safety Focused
- Direct drive heavy-duty gearbox and motor with built-in braking device that prevents uncontrolled curtain travel
- Heavy-Duty Commercial Photo Eyes reverse the downward motion of the door when a person or object enters its path to help prevent injury and damage
- Digital read-out on the control panel allows for advanced diagnostics with fast and easy setup and troubleshooting
Warranty
- 36-Months/500,000 cycle Limited Warranty on door components
Enhancements
Operation Options
IP65 (NEMA 4/4X equivalent)
Supply Voltages
- 208V AC 1PH†
- 230V AC 1PH
- 460V AC 3PH†
- 575V AC 3PH†
*horsepower is appropriate to size and weight of door
†requires stand-alone mounted transformer
Safety Focused
Actuation Options
- Push Button
- Sensing Edge
- Motion Detector
- Radio Control
- Loop Detector
- Extra set of Photo Eyes
- Fixed/Dual Frequency Receivers/Transmitters
Actuation Options
Florida Building Commission Impact Rating – Certified for Florida's High-Velocity Hurricane Zone – Level D
Available with WindSafe® wind load reinforcement built to withstand specific high-wind pressures to meet local building codes.
*Proper door selection is the responsibility of the homeowner. Please consult your local building code official, certified engineer or architect for wind load requirements in your specific location.
Design Options
Fascia - Back Hood
Sloped Hood
Sloped Bottom Bar
Curtain Material Options:
- Stainless Steel
- Aluminum
Vision Options
- 5” x ¾” open fenestration
- 5” x ¾” acrylic vision lites
Perimeter Seal Options
- Guide weatherstrip
- Guide brush seal
- Exterior lintel seal
- Interior baffle
Colors
Curtain
-
White
-
Gray
-
Beige
-
Brown
Finish Options
- Powder Coat
- Hardened Powder Coat*
- G-90 Galvanized
-
Mill
-
Clear
-
Bronze
Guides/Bottom Bar
-
Black
RAL Powder Coat*
Approximately 200 powder coat options are available to complement the exterior colors of a building.