top of page

Wayne Dalton Insulated Sectional Steel Doors Thermospan Models 125,150.200, 200-

The Thermospan® Series insulated doors are the only sectional doors in the industry with patented, roll-formed integral struts on each section, making them the most rigid doors available. The Thermospan® Series also has a patented manufacturing process with a polyurethane core that is continuously foamed-in-place between the outer and inner skins. An innovative thermal break keeps the interior skin at room temperature, preventing condensation and frost and helping to resist corrosion. Suitable for medium and heavy duty commercial and industrial applications, the Thermospan® series provides strength and durability coupled with thermal efficiency.

 

Ideal Applications Include:

Warehousing Facilities  |  Commercial Buildings   |  Industrial Facilities    |   Agricultural Facilities    |     Equipment Buildings   |   Maintenance

Quantity

Features

Standard Construction Model 200-20 Model 200 Model 150 Model 125
Max. Width 24'2" 40'2" 26'2" 18'4"
Max. Height 16'1" 32'1" 20'1" 16'1"
U-factor*   .12 .12 .14 .2
R-value** 17.5 17.5 14.16 10.79
Thermal Break Thermoplastic adhesive with rubber seal Thermoplastic adhesive with rubber seal Thermoplastic adhesive with rubber seal Thermoplastic adhesive
Steel Gauge 20 0.015" 0.012" 0.012"
Sectional Thickness 2" 2" 1.5" 7/8"
Spring Cycle 10,000 10,000 10,000 10,000
Exterior Surface Flush non-repeating random stucco texture Flush non-repeating random stucco texture and 1/4 inch wide pinstriping Stucco texture and 1/4 inch wide pinstriping Flush non-repeating random stucco texture and 1/4 inch wide pinstriping
Sound Transmission
(STC- ASTM E 413)		 Class 22 Class 22 Class 22 Class 21
Air infiltration
(IECC)		 0.17 cfm/ft² N 0.17 cfm/ft² 0.23 cfm/ft² at 25mph (4.20 m3/hr/m2 at 24 kmph) n/a
OITC (ASTM E 1332) Class 19 Class 19 Class 19 Class 18
ASTM E 84 Class A Class A Class A Class A (FS 10 or less / SD210 or less)
UBC 17-5 Meets Meets Meets Meets
ASTM D 1929 Flash ignition =  734˚ F, Self ignition = 950˚ F Flash ignition =  734˚ F, Self ignition = 950˚ F Flash ignition = 734˚ F, Self ignition = 950˚ F Flash ignition = 734˚ F, Self ignition = 950˚ F
Wind Load (optional) Yes*** Yes*** Yes*** No

*U-factor is independently tested and verified per ANSI/DASMA 105 using solid doors and specific product sizes.
**Wayne Dalton uses a calculated door section R-value for our insulated doors.
***FBC and TDI approved wind load reinforcement is available for hurricane-prone areas.


Benefits

Low Maintenance / Durable Design

  • Commercial-grade galvanized hardware contributes to long service life and provides superior strength and rigidity
  • Virtually maintenance free due to a baked-on polyester finish
  • Hot-dipped galvanized steel provides corrosion resistance and commercial durability

Thermal Performance

  • Thermal break separates inner and outer skins at top and bottom so virtually no heat or cold is conducted through the section
  • The CFC- and HCFC-free polyurethane insulation core with the standard joint seal aids in preventing air infiltration and can help reduce energy costs
  • Flexible vinyl bulb seal and non-corrosive polymer retainer can help prevent water and air infiltration at the bottom of the door
     

Warranty

  • 10-Years against cracking, splitting, rust deterioration and delamination (Models 200-20, 200 and 150)
  • 8-Years against cracking, splitting, rust deterioration and delamination (Model 125)
  • 1-Year against defects in materials and workmanship

Enhancements

ancements

Operation

  • Chain hoist operation
  • Motor operation


Safety Focused

  • Sensing edges
  • Photo eyes


High-Performance Design

High Cycle Spring Options

  • 25,000
  • 50,000
  • 100,000


Design Solutions

  • Pass Door

Design Options

Lite Options

  • Thermolite™
  • Black
  • Tru-Choice Color Match

 

Glass Options

  • Insulated
  • Tempered

 

Multi-wall polycarbonate glazing Options

  • Brown
  • White
  • Clear

 

Factory Installed top

Weatherseal EPDM bulb seal

Thermal Performance Jamb Seal

Special track designs

Continuous wall angle standard

Colors

  • White Smooth

  •  

  • White Stucco

  •  

  • Tan Stucco

  •  

  • Brown Stucco

  •  

  • Gray Stucco

Finish Options Model 200-20 Model 200 Model 150 Model 125
White Smooth *      
White Stucco   * * *
Tan Stucco   * *  
Brown Stucco   * *  
Gray Stucco      *  

Custom Colors

Wayne Dalton’s custom painting process that offers more than 6,000+ colors.

bottom of page